Dual Purpose Drive
The TM10e2 Dual Purpose (DP) Drive is the ideal solution for modernization projects where the user wishes to upgrade from a legacy DC system to a modern AC system. The TMdrive-10e2 Dual Purpose drive is capable of controlling either a DC or AC motor. This capability allows for flexibility in planning system modernizations in a manner that accommodates constraints created by operating demands and budgetary considerations. New AC motors can be powered and controlled using TM10e2 DP drives with AC motor control firmware installed. DC motors can be powered and controlled using TM10e2 DP drives with DC motor control firmware installed. DC Motors can be replaced at any time with AC motors and powered by the previously installed TM10e2 DP drives.
The Dual Purpose drive uses standard TMdrive-10e2 drive power and control hardware for both AC and DC motor control. When DC motors are upgraded to AC, the drive can be reconfigured for AC motor control by switching the firmware from the DC to the AC motor control function set. The drive can then be quickly re-tuned to achieve the required operational performance.
Requirements
DC and AC motors have different physical and electrical requirements. In addition to the standard TMdrive-10e2 AC drive, an auxiliary panel with both armature and field circuit filters is required for the DC motor, shown in the figure below.
The Dual Purpose drive uses standard TMdrive-10e2 drive power and control hardware for both AC and DC motor control. When DC motors are upgraded to AC, the drive can be reconfigured for AC motor control by switching the firmware from the DC to the AC motor control function set. The drive can then be quickly re-tuned to achieve the required operational performance.
Requirements
DC and AC motors have different physical and electrical requirements. In addition to the standard TMdrive-10e2 AC drive, an auxiliary panel with both armature and field circuit filters is required for the DC motor, shown in the figure below.The Dual Purpose drive uses standard TMdrive-10e2 drive power and control hardware for both AC and DC motor control. When DC motors are upgraded to AC, the drive can be reconfigured for AC motor control by switching the firmware from the DC to the AC motor control function set. The drive can then be quickly re-tuned to achieve the required operational performance.
Requirements
DC and AC motors have different physical and electrical requirements. In addition to the standard TMdrive-10e2 AC drive, an auxiliary panel with both armature and field circuit filters is required for the DC motor, shown in the figure below.The Dual Purpose drive uses standard TMdrive-10e2 drive power and control hardware for both AC and DC motor control. When DC motors are upgraded to AC, the drive can be reconfigured for AC motor control by switching the firmware from the DC to the AC motor control function set. The drive can then be quickly re-tuned to achieve the required operational performance.
Requirements
DC and AC motors have different physical and electrical requirements. In addition to the standard TMdrive-10e2 AC drive, an auxiliary panel with both armature and field circuit filters is required for the DC motor, shown in the figure below.